Application
Typical areas of use are:
- Process Control
- High overload pressure
- Gases
- Compressed air
- Liquids
Performance
- High accuracy
- Extremely long-term stability
- Minimum temperature and static pressure inϐluence
- Compact model and lightweight
- Simple to mounting
- Internal temperature compensation
- Fast response time
Measuring principle:
Single crystal silicon sensor / Piezo-resistive / Metal sensor
Reference conditions:
- Ambient temperature TA = constant, in the range of : +21 to 33 °C (+70 to 91 °F)
- Humidity = constant, in the range of: 5 to 80% rH
- Ambient pressure pA = constant, in the range of: 860 to 1060 mbar (12.47 to 15.37 psi)
- Position of the measuring cell = constant, in range: horizontally ±1°
- Process isolating diaphragm material: AISI 316L/1.4435
- Filling oil: silicone oil
Warm up time: approx. 2 seconds
Long-term stability: better than 0.05% FS per year
Power supply:
Voltage supply: 5V DC
Output: 90±10mV
Environmental conditions:
- Ambient temperature range:- 40 ... 85 °C
- Process temperature range: - 40 ... 85 °C
- Storage temperature range: - 40 ... 100 °C
Process wetted material (diaphragm):Stainless steel 316 L
Sensor body material:Stainless steel 304
Option
HART transmitter Module SE62H
HART Transmitter Module can convert voltage
signal into a 4 to 20mA output current
● Supply voltage: 9-45 VDC
● Output signal: 4 to 20mA with superimposed
communication signal for HART protocol
● Galvanic isolation: 2 kV AC
